AbstractsEngineering

(ULSI) causes an increase of the resistance of the wiring system by increased scattering of electrons at side walls and grain boundaries in the state of the art Cu technology, which increases the RC delay of the interconnect system and thus degrades the performance of the device. The outstanding properties of carbon nanotubes (CNT) such as a large mean free path, a high thermal conductance and a large resistance against electromigration make them an ideal candidate to replace Cu in future feature nodes. The present thesis contributes to the preparation and properties of CNT based vertical interconnections (vias). In addition, all processes applied during the fabrication are compatible to ULSI and an interface between CNT based vias and a Cu metallization is studied. The methodology for the evaluation of CNT based vias is improved; it is highlighted that by measuring the resistance of one multiwall CNT and taking into account the CNT density, the performance of the CNT based vias can be predicted accurately. This provides the means for a systematic evaluation of different integration procedures and materials. The lowest contact resistance is obtained for carbide forming metals, as long as oxidation during the integration is avoided. Even though metal-nitrides exhibit an enhanced contact resistance, they are recommended to be used at the bottom metallization in order to minimize the oxidation of the metal-CNT contact during subsequent processing steps. Overall a ranking for the materials from the lowest to the highest contact resistance is obtained: Ta < Ti < TaN < TiN « TiO2 « Ta2O5 Furthermore the impact of post CNT growth procedures as chemical mechanical planarization, HF treatment and annealing procedures after the CNT based via fabrication are evaluated. The conductance of the incorporated CNTs and the applicable electrical transport regime relative to the CNT quality and the CNT length is discussed. In addition, a strong correlation between the temperature coefficient of resistance and the initial resistance of the CNT based vias at room temperature has been observed. Die kontinuierliche Miniaturisierung der charakteristischen Abmessungen in hochintegrierten Schaltungen (ULSI) verursacht einen Anstieg des Widerstandes im Zuleitungssystem aufgrund der erhöhten Streuung von Elektronen an Seitenwänden und Korngrenzen in der Cu-Technologie, wodurch die Verzögerungszeit des Zuleitungssystems ansteigt. Die herausragenden Eigenschaften von Kohlenstoffnanoröhren (CNT), wie eine große mittlere freie Weglänge, hohe thermische Leitfähigkeit und eine starke Resistenz gegenüber Elektromigration machen diese zu einem idealen Kandidaten, um Cu in zukünftigen Technologiegenerationen zu ersetzen. Die vorliegende Arbeit beschreibt die Herstellung und daraus resultierenden Eigenschaften von Zwischenebenenkontakten (Vias) basierend auf CNTs. Alle verwendeten Prozessierungsschritte sind kompatibel mit der Herstellung von hochintegrierten Schaltkreisen und eine Schnittstelle zwischen den CNT Vias und einer Cu-Metallisierung ist…