Abstracts Engineering

Natural Organics Removal using Membranes

by Andrea Iris Sch��fer

Membrane processes are increasingly used in water treatment. Experiments were performed using stirred cell equipment, polymeric membranes and synthetic surface water containing natural organics, inorganic colloids and their aggregates, and cations. All processes could remove a significant amount of natural organics. Pretreatment with ferric chloride was required to achieve significant organic removal with MF and high MWCO UF. Additionally, fouling mechanisms for the three processes were investigated. Crucial parameters were aggregate characteristics (fractal structure, stability, organic-colloid interactions), solubility of organics and calcium, and hydrodynamics. In MF, fouling by pore plugging was most severe. Variations in solution chemistry changed the aggregation state of the colloids and/or natural organic matter and dramatically affected rejection and fouling behaviour. UF membrane fouling was mainly influenced by pore adsorption and could improve natural organics rejection significantly. Coagulant addition shifted fouling mechanism from pore adsorption to cake formation. Aggregate structure was most significant for flux decline. In NF, rejection of natural organics involved both size and charge exclusion. Fouling was caused by precipitation of a calcium-organic complex. Fouling could be avoided by pretreatment with metal salt coagulants. Thorough chemical characterisation of the organics used demonstrated that only size and aromaticity can be related to fouling. The study is concluded with a process comparison based on a water quality parameter and a cost comparison. Treatment cost of microfiltration with chemical pretreatment was similar to that of nanofiltration at a comparable natural organics rejection.